Leadvision ELEGANCE PREMIUM Guide D'installation page 7

Straight Railing Installation:
765 30.1
IMPORTANT POINTS:
• This railing is designed for a maximum of 1806 mm (71.1") internal rail length.
• Aluminum balusters (M-LV-0218-A-42)
DO NOT NEED to be cut for the straight railing 918 mm (36.1").
• Cut the handrail, the bottom rail and the galvanized insert on each side to comply
with the Canadian Building Code, which requires a maximum width of 102 mm (4") between
the balusters.
• Posts need to be cut to the proper design height of 1139 mm (44.8") for the composite sleeve and
1090 mm (43") for the steel post.
• Foot blocks should be evenly spaced out depending on the length of the final rail.
• Foot blocks cannot be installed underneath a pre-drilled baluster hole.
1806
71.1
7