Publicité
Les langues disponibles
Les langues disponibles
Mark where the post mount
1
(J-LV-0215-36) will be installed. The
J-LV-0215-36
maximum distance of the post mount is
1646 mm (64.8") as shown in diagram 1.
Cut post mount (J-LV-0215-36), which
2
will be placed on the top, to the length of
937 mm (36.9") as shown in diagram 2.
The post mount on the lower side DO
NOT NEED TO BE CUT.
Cut the post sleeve (N-UH35), which will
be placed on the top, to the length of
991 mm (39") as shown in diagram 3. The
post sleeve on the lower side DO NOT
NEED TO BE CUT.
14
DIAGRAM 1
(J-LV-0215-36),
J-LV-0215-36
N-UH35
DIAGRAM 2
DIAGRAM 3
Install the post mount (J-LV-0215-36) as
3
diagram 4.
Install the post sleeve (N-UH35) with
screw WJ0133 as shown in diagram 5.
DIAGRAM 4
First, mark on the post which will be on
4
the stair top using the "Stairs - Top Post"
cardboard template. Use the top 4 holes
for top post brackets and use the bottom 2
holes for the bottom post brackets.
Then, pull a string down at a 32 degree
angle for locating the "Stairs - Bottom Post"
cardboard template on the stair bottom post
as shown in diagram 6.
Note: The cardboard template location
should be measured from the bottom.
J-LV-0215-36
N-UH35
DIAGRAM 5
Publicité
