Assembly - Snapper XD SXDUC82 Manuel Du Propriétaire

ASSEMBLY

UNPACKING
• Carefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are
included.
• Inspect the product carefully to make sure no breakage or damage occurred during shipping.
• Do not discard the packing material until you have carefully inspected and satisfactorily operated the product.
• If any parts are damaged or missing, please call 1-800-317-7833 for assistance.
PACKING LIST
• Utility cart
• Handle assembly
• Knobs and U-bolts
• Owner's Manual
W A R N I N G
If any parts are damaged or missing, do not operate this product until the parts are replaced. Failure to heed this warning
could result in serious personal injury.
W A R N I N G
Do not attempt to modify this product or create accessories not recommended for use with this product. Any such alteration
or modification is misuse, and could result in a hazardous condition leading to possible serious personal injury.
ATTACH THE UPPER HANDLE (See Figure 2)
• Slide the upper handle over the lower handle tubes on the bucket assembly. Make sure the bolt holes align.
• Insert a U-bolt (1) from the outside of the handle, passing through the bolt hole where the upper and lower handles attach.
• Once the U-bolt (1) is completely through the handle assembly, tighten the knob (2) securely.
• Attach the other side of the handle the same way.
1
8
2
Fig. 2