Snapper XD SXDUC82 Manuel Du Propriétaire page 12

OPERATION
USING DRAWBAR (See Figure 9)
W A R N I N G
Never use drawbar on highway. Never turn on the cart when using drawbar.
W A R N I N G
Please follow the tractor or ZTR manual for those towing recommendations.
Install the drawbar (See Figure 9)
1. Pull out the R-pin (B) and remove the whole pin assembly (A) from the drawbar.
2. Stretch the drawbar fully.
3. Align the hole of the drawbar with the hole of tractor or ZTR.
4. Reinsert the pin assembly and make sure the drawbar is secure.
Remove the drawbar (See Figure 10)
1. Pull out the R-pin (B) and remove the whole pin assembly (A).
2. Fold the drawbar.
3. Reinsert the pin assembly to make sure the drawbar is secured on the cart.
W A R N I N G
The utility cart can only be operated on cement pavement or gravel road in at most 6 miles per hour. Only operate on
slopes of 16.7 degrees or less.
1
B
A
1
A
2
2
B
3
12
4
3
Fig. 9
Fig. 10