Snapper XD SXDUC82 Manuel Du Propriétaire page 10

OPERATION
LOCK/UNLOCK THE BRAKE (See Figure 4)
• Step on the brake, the brake will be locked, and the utility cart will stop.
• Step on the brake again, the brake will be unlocked.
STARTING (See Figure 5)
• To utilize your utility cart set the power switch (4) to the ON position.
MOVING FORWARD/REVERSE(See Figure 6)
1. Select forward/reverse.
2. Select high/low speed.
3. Press lock-out button (2). (There is a 4-seconds lead time to engage step 4.) If the thumb paddle (5) is not pressed
within 4 seconds, the unit will not start and lock-out button needs to be engaged again.
4. Press the thumb paddle (5) down to start the utility cart.
NOTE!You can press the thumb paddle again to restart the utility cart within 30 seconds after releasing it.Move in reverse
only for short distances. If you have a long distance to travel, turn your utility cart around and go forward.
1
1
Brake
Fig. 4
2
3
3
2
10
4
Fig. 5
4
5
Fig. 6