Hilti TE 3000-AVR Mode D'emploi page 12

3.2 Transport trolley components
3.3 Intended use
The product described is a hand-held electric breaker with 28 mm hex chuck. It is designed for chiseling
work on concrete, masonry and asphalt. Excavation and compacting are further possible applications.
▶ Operation is permissible only when connected to a power source providing a voltage and frequency in
compliance with the information given on the type identification plate.
3.4 Possible misuse
This product is not suitable for working on hazardous materials.
This product is not suitable for working in a damp environment.
3.5 Service indicator
The breaker is equipped with a service indicator LED.
Status
The service indicator lights red.
The service indicator blinks red.
Bring the product to Hilti Service in good time. This will help to ensure that it's always ready for use.
3.6 Active Vibration Reduction (AVR)
The breaker is equipped with an Active Vibration Reduction (AVR) system, which reduces vibration
significantly.
6 English
2
Grip
@
Locking bar
;
Holder for accessory tools (chisels)
=
Wheels
%
Wheel securing parts (washer, retaining pin)
&
Power tool locating pin
(
Meaning
End of service interval – servicing is due.
A fault has occurred in the tool.
Protection against overheating
The voltage provided by the electric supply is too
high.
2190685
*2190685*