Check Network Installation - Plugwise Anna Mode D'emploi

WiFi via WPS.
Does your WiFi router have a WPS-

button? WiFi via WPS is only supported
via a special WPS-button on the router.
Press the black button on the Smile for

2 seconds.
Wait until the light "WLAN" is blinking

quickly and regularly.
Press the WPS-button on the WiFi

router to connect to WiFi.
If after 2 minutes the Smile has not
made a connection yet to your WiFi
network, the Smile will be recalled to
the starting position.

Check network installation.

Check first if you have connected the
Smile to your network. To do this, use a
smartphone or tablet that is connected
to the network to which the Smile is also
connected to.
Go to https://anna.plugwise.net.

Log in with your Smile ID.

You will be directed to the HTML interface
of Anna.
14 | English
LAN.
Do you rather connect the Smile with a
network cable (UTP-cable) to your router?
That is also possible. Connect a network
cable between the router and the Smile
before you insert the plug of the Smile in
the socket.
Having trouble via WiFi?
Press the black button on the Smile for 5
seconds until the light "Status" has blinked
5 times and the light "WLAN" starts to
blink rapidly. (The network settings will be
deleted.) Wait until the Smile has booted
up, then try again to connect the Smile to
your WiFi network (step 1).