Apéndice B: Attaching The Lanyard To The Al1 - Samson AirLine AX1 Manuel D'utilisation

Samson AirLine
1. Pass the cord from the Transmitter tie clip through the holes on
the top rear of the AL1. The clip may have to be rotated (and can
be removed) to reveal the exit hole. See page 16 in this manual for
further instructions. (For clarity, all the illustrations in this
Appendix show the AL1 with the tie clip removed.)
Appendix B: Attaching the Lanyard to the AL1
Transmitter
Tie Clasp
AL1 Tie Clip
Screw
2. Pull the cord all the way through and lift it over the clasp,
making a loop. Pull the clasp through the loop taking up the slack.
86