FF Europe EXBK04 Mode D'emploi page 25

EN
ASSEMBLY INSTRUCTION
Step3: Install left and right pedal assemblies
- The pedals are marked L and R (35L/R) - left and right.
- Connect them to their appropriate crank arms.
- Match the foot buckle fasteners with the corresponding pedals according to the note as
shown in figure 1. Firstly, button the foot buckle fasteners as shown with arrow No 1
into the pedal convex plate, tighten in the direction as shown with arrow No 2. Then as
shown in figure 2, penetrate the other end of the foot buckle fasteners into the hole of
the pedal in the direction shown with arrow No 3. You can select the appropriate hole
position based on individual settings, Tighten in the direction as shown with arrow No 4
(figure 3).
25