Philips SC1996 Mode D'emploi page 16

ENGLISH
16
Choosing the right attachment
- Body attachment
The body attachment can be used to treat unwanted body hair on all body
areas below the neck (for exceptions, see chapter 'Contraindications').
The body attachment can cover an area of 4cm² and has been specially
designed for faster treatment of larger areas like legs.
Never use the body attachment on the face.
Precision attachment
-
The precision attachment includes an additional integrated light filter and
can be used for safe treatment of unwanted facial hair on the upper lip,
chin and cheeks. It may also be used on other sensitive areas of the body,
such as the underarms and bikini area or hard-to-reach areas.
Never use the appliance around the eyes or near the eyebrows.
First use and skin test
When you use the appliance for the first time or after recent tanning, we
advise you to perform a skin test on each area to be treated to check
your skin's reaction to the treatment and to get accustomed to light-based
treatment.
1 Choose the attachment appropriate for the area you intend to treat.
2 Choose an area close to the area you intend to treat.
3 Insert the small plug into the appliance and put the adapter in the
wall socket.
Note: Make sure the selected attachment is placed on the appliance.
4 Press the on/off button to switch on the appliance.
Intensity light 1 goes on.
,
Note: The appliance always automatically selects the lowest light intensity
setting. See section 'Light intensity' in chapter 'Preparing for use' to determine
the appropriate light intensity.
5 To adjust the light intensity setting, press the on/off button
one or more times until you have reached the required setting.
The corresponding intensity light lights up.