IR REMOTE CONTROLLER (optional)
Environment Exposure
DO NOT expose the IR Remote to any of the following: direct sun and heat, high
humidity and rain or water.
Handling the IR Remote
DO NOT drop or cause shock to the IR Remote as serious damage may occur.
COMPACT DISCS
Disc Handling and Care
DO NOT touch the playing side (opposite of label side) of the disc. When han-
dling the disc, only the outer edges or center hole of the disc should be touched.
DO NOT affix any sticker or label to the disc. DO NOT apply vinyl record spray,
anti-static agent, acetone, or any other volatile chemicals to the disc.
Damaged Disc
DO NOT play a cracked, warped, or damaged disc. Doing this may cause serious
damage to the playback mechanism.
New Discs
The CD player will eject discs that have either been inserted incorrectly or have
irregular surfaces. If a new disc is ejected after loading, feel around the outer
edge of the CD and its center hole. Any small burrs or irregularities could inhibit
proper loading of the disc. To remove the burrs, rub the inside edge of the hole
and outside edge of the disc with an object such as a ball point pen.
C
ONTENTS OF
Model 9000 Source unit
Installation & Operation Manual
Installation Instruction Sheet
Standard Mounting Sleeve
Back strap (taped to box insert)
C
ARTON
Chassis Release Keys (2)
Hardware Package
16-pin Power Harness
Faceplate Case
IR Remote Control (optional)
P
RECAUTION
5