Rockford Fosgate RFX Serie Installation Et Fonctionnement page 16

O -R
PERATION
SELECTING A STATION
Press the DIR
once and the Tuner will rapidly proceed to the
next DIR (UP) or pervious DIR
station.
Press and holding either the DIR
ton (SEEK or
TUNER MANUAL mode. You can now manually search up or down at a rate of one digit
per click (pressing and holding the DIR
PRESET BUTTONS
Each Tuner mode—FM1, FM2, and AM—has 10 presets for a total of 30 presets.
NOTE: The following is for the panel of the source unit. See the end steps if using the
optional remote.
To Set a Preset Button (for buttons 1 to 6)
1. Tune the Tuner to the station you wish to program.
2. Press and hold any preset button (1 to 6) for five seconds and it will program that
setting.
PUSH
MENU
To Set a Preset Button (for buttons 7 to 0)
3. Tune the Tuner to the station you wish to program.
4. First, press the T-ACC button, then press and hold preset button
(7 to 0) for five seconds and it will program that setting.
To Set a Preset Button (remote use)
1. Tune the Tuner to the station you wish to program.
2. Press and hold any preset button (1 to 0) for five seconds and it
will program that setting.
16
T
ADIO UNER
/ Button (SEEK
) for 1 second will put you into
ENTER SCAN
DIR
1
BAND
or )
VOL
(DOWN)
/ but-
PUSH
MENU
/ button will allow rapid searching).
ROOT DIR SONG
RPT RDM
2 3
DISP
DIR
MODE
DIR
ROOT
T/-10 T/+10
4 5 6
RFX 9000
Remote
8
MUTE
7
T-ACC
OPEN
PUNCH
0
AS
9
LO/DX
8
MUTE
7
T-ACC
1