emerio CG-124243.1 Mode D'emploi page 8

Multigrill
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

1. Open the upper cover by the handle with one hand while the other hand to press the release button. Let go of
the release button as soon as the upper cover has been pushed all the way to the back.
2. For best results, lightly coat the cooking plates with a little cooking oil or cooking spray.
3. Plug the appliance into an appropriate electrical outlet.
4. Set the left (lower grill plate) and right (upper grill plate) temperature control to the desired heating level (160-
230℃). The Led screen will light up and the digits will start flashing, which indicates the appliance is heating up.
As soon as the set temperature is reached, the digits will stop flashing with a beep sound.
5. Lay the food to be grilled onto the heating surfaces without adding extra fat or oil.
6. Turn over the food after a certain time.
Notes: The grill items are cooked in their own juices and excessive liquids flow into the grease drip tray. The
oil/fat collected in the drip tray must not be re-used.
7. Remove the food with the help of a plastic heat-resistant spatula. Never use metal tongs or a knife as these can
cause damage to the non-stick coating of the cooking plates.
WARNING:
Do not change the grill positions (from closed grill position to open grill position or from open grill position to
closed grill position) while the plates are hot. Please choose the grill position before switching on the appliance.
Always exercise caution when handling the appliance during cooking. To open the appliance grasp the black
plastic area of the handle. This part of the handle stays cool to touch while cooking. Do not touch the other
parts during or immediately after cooking. Use an oven mitt to prevent burns.
Allow the appliance to cool down before handling (at least 30 minutes).
CLEANING AND MAINTENANCE
1. Always switch off and unplug the appliance after use. Allow it to cool down before cleaning.
2. Remove the grease drip tray carefully from the appliance (Fig.1) and rinse it with hot water and a neutral
dishwashing detergent. The oil inside the tray can be very hot; let it cool down completely before cleaning. The
grease drip tray is dishwasher safe.
3. Remove the excess grease with a paper towel before detaching the grill plates. To detach the grill plates, push
the respective release buttons on the upper and lower housing. (Fig.2) Clean the grill plates with a soft cloth
and hot water.
4. Use a damp cloth and warm water with a little dishwashing detergent to clean the appliance housing. After each
cleaning, dry all surfaces thoroughly.
5. Dry the grill plates and especially their electric contacts and reassemble the appliance. The grill plates can only
be mounted in their respective positions. First inert the long sides opposite the release buttons into the housing.
Then push the other longs sides into the latches so that the release buttons click and the grill plates engage.
6. Never use abrasive cleaning agents or sharp objects (e.g. scrubbing brush or knife) for cleaning.
Caution: Do not immerse the appliance in water or other liquids. There is danger to life due to electric shock!
Fig.1
Fig.2
- 7 -

Publicité

Table des Matières
loading

Table des Matières