Taurus Bapi 1200 Inox Mode D'emploi page 12

DESCRIPTION
A Speed regulator control
B On/off switch
C Turbo button
D Motor body
E Stick Blender
F Measuring cup
G Whisk (*)
H Chopper jar (*)
(*) Only available in the model Bapi 1200 Plus
Inox / Bapi 1200 Premium Plus Inox.
If the model of your appliance does not have the
accessories described above, they can also be
bought separately from the Technical Assistance
Service.
INSTRUCTIONS FOR USE
BEFORE USE:
- Make sure that all products' packaging has
been removed.
- Before using the product for the first time, clean
the parts that will come into contact with food in
the manner described in the cleaning section.
- Prepare the appliance according to the function
you wish to use
USE:
- Unroll the cable completely before plugging it in.
- Connect the appliance to the mains.
- Turn the appliance on, by using the on/off button
(B).
- Select the desired speed.
- Work with the food you want to process.
ELECTRONIC SPEED CONTROL:
- The speed of the appliance can be regulated
by using the speed regulator control (A). This
function is very useful, as it makes it possible to
adapt the speed of the appliance to the type of
work that needs to be done.
TURBO FUNCTION:
- The appliance has a Turbo function. By activat-
ing the Turbo function (C) all the power of the
motor becomes available, thus obtaining a finer
finish in the final texture of the product.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- Stop the appliance by releasing the pressure on
the on/off button (B).
- Unplug the appliance from the mains.
- Clean the appliance.
ACCESSORIES:
STICK BLENDER ACCESSORY (FIG.1):
- This accessory is used for making sauces,
soups, mayonnaise, milkshakes, baby food,
crush ice ...
- Attach the stick to motor body and turn in the
direction of the arrow.
- Put the food to be prepared in the jar and switch
the appliance on.
- For further cleaning, detach and remove the
stick by turning in the opposite direction of the
arrow.
CHOPPING ACCESSORY (FIG.2):
- This accessory is used to chop vegetables or
meat...
- Put the food to be prepared in the chopping
container and attach the cover firmly, turning
in the counterclockwise until hear the click
(Fig.2.1).
- Attach the unit to the cover turning in the direc-
tion of the arrow and switch the appliance on
(be careful: do not switch the appliance on if the
whole unit is not properly fitted and connected
together) (Fig.2.2).
- Stop the appliance when the food reaches the
desired texture.
- Detach the unit from the lid and the lid from the
chopper.
- Note 1: Do not work with Turbo funcion with this
accessory attached.
- Note 2: this accessory has a transparent lid on
the base that allows covering the jug to store
the mixture and is non-slip.
WHISK ACCESSORY (FIG.3):
- This accessory is used to whip cream, beat egg
whites...
- Attach the unit to the motor body and turn in the
direction of the arrow (Fig. 3.1).
- Put the food into a receptacle and switch the
appliance on. For best results, turn the whisk
clockwise.
- Remove the whisk accessory and release the
motor body.
- Note 1: Do not work at high speeds with this
accessory attached, as this would cause defects
in the whisk (spinning its wires).
SAFETY THERMAL PROTECTOR:
- The appliance has a safety device, which pro-
tects the appliance from overheating.
- If the appliance turns itself off and does not