General International BT8010 Manuel D'instructions Et D'assemblage page 9

7. ATTACH THE FILTER BAG (B, fig 8) with a belt clamp (C, fig 8) and
hang it from the support arm.
CAUTION: Use caution and wear gloves when handling metal parts
such as the belt clamps, which can cut if handled carelessly.
8. ATTACH THE COLLECTION BAG with a belt clamp (fig 9).
9. ATTACH THE HOSE (K, fig 10) to the bottom of the impeller /
separator assembly (D) with a hose clamp (J).
10. FASTEN THE HOSE FITTING (I, fig11) to the other end of the hose
(K) with a hose clamp (J).
170227
9