Publicité
Les langues disponibles
Les langues disponibles
CLEANING OR REPLACING THE
COLLECTOR BAG
NOTE: Depending on your needs, shop situation and local regulations,
collections bags can be emptied and re-used or disposed of (with their
contents) and replaced with a new bag.
1. Turn off and unplug the machine.
2. Unclip the bag clamp and remove the bag from the machine.
3. Empty the bag (or simply dispose of the bag and its contents and
replace with a new bag) disposing of the contents in a safe and
responsible manner that complies with all local codes and regulations
regarding waste disposal.
4. Re-install the bag and re-attach the clamp.
CLEANING OR REPLACING THE
FILTER BAG
TIP/HINT: To avoid potentially costly down-time, consider keeping a
spare filter bag on hand and nearby for use if needed.
After a period of time, depending on the frequency of use, the filter bag
may become clogged and affect airflow as well the overall efficiency of
the unit. Should you notice a drop in the efficiency or performance of the
unit, it may be a sign that it is time to clean the filter bag. If so, proceed as
follows:
1. Turn off and unplug the machine.
2. Unclip the belt clamp and remove the bag from the machine.
3. Clean the dust from inside the filter bag using a vacuum.
4. For extreme cases, after the initial cleaning with a vacuum, turn filter
bag inside out and vacuum a second time, laying the bag on a flat hard
surface (such as a table or workbench) and slowly passing the vacuum
nozzle over the entire surface area.
5. Reinstall the bag and reattach the clamp.
NOTE: Filter bags can also be machine washed (gentle cycle only) in
cold or warm water. Do not use hot water or detergent. Make sure the
bag has completely dried before reinstalling on the machine. Make sure
to remove the belt clamp from the bag before washing!
170227
11
Publicité
