Step 2: Installing The Rollers; Step 3: Preparing The Solar Pool Cover; Operation; Rolling Up The Solar Pool Cover - Steinbach 036086 Notice Originale

Step 2: Installing the rollers

3
10 13 11
1. Guide the axle through the two bore holes in the frame near the rollers
12
2. Position the small disks
3. Secure the rollers with the locking pins
Bend over the ends of the locking pins after you have inserted them in the bore hole.
4. Push the cover caps

Step 3: Preparing the solar pool cover

Cut holes for the elastic bands into your solar pool cover. Space the holes at regular intervals across the
width of your solar pool cover.

Operation

Rolling up the solar pool cover

1. Place the solar pool cover winder next to the pool on a sturdy and level surface.
2. Thread the elastic bands
3. Undo the fixations of the winding rods
4. Turn the hand wheel
5. Secure the winding rods with the two fixations.

Unwinding the solar pool cover

1. Undo the two fixations of the winding rods
2. Pull the cover of the solar pool cover winder over your pool with the help of a second person.
3. Secure the winding rods with the two fixations.

Cleaning

Only clean the product with a standard bathroom cleaner, clear tap water and a lint-free cloth.
Aggressive cleaning agents can damage the product. Dry the product with a lint-free cloth.
14
9 12 3
and the rollers on the axle on both sides.
9 11
on both sides.
13
onto the rollers on both sides.
10
through the holes in the cover and tauten the cover.
15
on both sides.
2
until the pool cover is wound up completely.
7
.
2
.
3