Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Maintenance
-If the power cable is damaged, it must be replaced by the manufacturer, their after-sales service, or a qua-
lified individual.
-Do not place your mini-bar close to a heat source (e.g. radiator). Keep out of direct sunlight.
-Ensure that the mini-bar is level. If it is not level, the alignment of the doors and the magnetic contact could
be affected.
-Caution – do not cover or block the ventilation or the grills of your appliance.
Service: Repairs and maintenance of the appliance must be carried out by an authorised and certified tech-
nician.
In case of malfunction
1. If the mini-bar is not working:
Check if there is a power failure (check the fuses)
Check if it is plugged in.
3. When the mini-bar does not cool sufficiently:
Have you put something hot or too many products in the mini-bar?
Check that the door closes properly
Check that the door seals are not damaged
Check the ventilation surrounding the mini-bar
4. If condensation appears on the outside of the mini-bar, this could be due to excessive humidity in the room
(change of temperature). Therefore this is not a sign of malfunction. Please wipe the appliance with a dry
cloth.
Advice for reducing your energy consumption
•
Take care to maintain a minimum distance between different products when you put them in the mi-
ni-bar to allow a good circulation of air.
•
Opening the door for too long or too frequently can cause a rise in the temperature of the interior of the
mini-bar. For this reason the door must be closed immediately after use.
•
Ensure that the door's airtight seal is correctly positioned, and that the appliance's ventilation openings
are not obstructed.
•
If the layer of ice becomes too thick, this can affect the performance of the mini-bar. When the layer of
ice is thicker than 5mm, the appliance must be defrosted.
•
The various compartments, trays and shelves are pre-arranged in the optimum layout.
Page 10
Publicité
Chapitres
Table des Matières
