Weller WXsmart WCU Traduction De La Notice Originale page 18

Technical Data
Temperature measuring range Thermocross
Temperature measuring range Type-K
Thermocouple
Applicable sensor
Measuring tolerance
Energy supply
Recommended battery
Dimensions L x W x H
Weight
Ambient temperature
Air humidity range
Ambient conditions
Safety information
Read these instructions and the
accompanying safety information
carefully before starting up the device
and starting work with the device.
Failure to observe the safety regulations results in a
risk to life and limb.
Keep these instructions in a place that is accessible to
all users. Please adhere to the operating instructions
of the connected devices.
Please be sure to read and follow the operating
instructions for your Weller Supply Unit.
For safety reasons, children and
youths under the age of 16, as well as
persons who are not familiar with these
operating instructions, may not use the
device. Children should be supervised
in order to ensure that they do not play
with the tool.
WCU
-150°C - +1200°C
- 302 °F - +2192 °F
K (CA) type thermocouple
±3 °C (between 300 and 600 °C)
±6 °F (between 572 and 1112 °F)
Alkaline cell recommended
Ansmann XPower alkaline battery 9V E-block
138 x 73 x 43 mm
120 g (Without battery)
max. 80% Relative air humidity, without condensation
Applicable pollution degree 2 (According to IEC/
This device is not intended for use by
persons (including children) with limited
physical, sensory or mental aptitude,
or by persons who lack knowledge or
experience in handling the device.
Always place the soldering tool in the safety rest while
not in use.
Keep other persons well away from your
workplace.
The work area is out of bounds for children and
unauthorised persons. Never allow other persons to
touch the soldering tool or cable.
ENGLISH
0°C - 400°C
32°F - 752°F
9 V Dry battery
0 °C - 40 °C,
UL61010-1)
Use only original
Weller soldering tips!
EN
17