Setting Up The Nursery Unit - Angelcare AC117 Manuel De L'utilisateur

STEP 3 - SETTING UP THE NURSERY UNIT
3.1 - SELECT A LOCATION FOR THE NURSERY UNIT
IMPORTANT
Place the cot near a supporting wall and far from air currents. Install the Nursery Unit on a flat, stable surface
facing the cot at a distance of at least 1 meter. Make sure to plug the adapter to the socket outlet nearest to
the equipment and that is easily accessible.
Sensor Pad
Note: Each time you power ON your Nursery Unit, the internal thermometer will need to calibrate to ensure
accuracy. This automatic process will take approximately 30 minutes. The colour changing temperature display,
by default, will be turned "OFF". You may turn this feature "ON" in the settings mode on your Parent Unit.
66
1
2
MUST BE MORE THAN
1 METER AWAY
5
1) Remove the batteries cover and insert
2 AAA Alkaline Batteries
(not included)
Note:
The batteries are a back up power
supply in case of power outage.
2) Install the Nursery Unit on a flat,
stable surface facing the cot at a
distance of at least 1 meter.
3) Check to make sure the Sensor Pad
has not moved from position.
4) Place the mattress back inside
the cot.
5) Connect the adapter to the
Nursery Unit and into an electrical
outlet.