Broil Chef 06695002 Guide De L'utilisateur page 9

Step 6 (Gas tank bracket assembly)
Align the holes on the gas tank bracket (G) with the holes on
a)
the cart back panel (D).
b) Insert one M4 x 10 bolt (BB) and one M4 flat washer (EE) into
each pre-drilled hole.
c) Tighten all the bolts using the screwdriver provided.
GSS2520JA
Instruction Manual
Guide d'utilisation
Step 5 (Front beam assembly)
a) Align the holes on cart left panel (B) with the holes on
front beam (E).
b) Insert one M6 x 15 bolt (AA), one M6 flat washer (CC) and
one M6 lock washer (DD) into each pre-drilled hole and
tighten bolts by hand.
c) Repeat the procedure with hole cart right panel (C) and
front beam (E).
d) Go back and tighten all bolts using screwdriver provided.
Step 7 (Spare tank stopper assembly)
a) Align the holes on the two tips of spare tank stopper (F) with hole on
the cart base (A) and the hole on the cart back panel (D).
b) Insert one M4 x 10 bolt (BB) and one M4 flat washer (EE) into each
pre-drilled hole.
c) Tighten all the bolts using the screwdriver provided.
9