Step 15 (Install the grease cup and grease cup
support)
a) Hook the grease cup support (R) into the
grooves beneath the grease pan.
b) Put the grease cup (S) onto the grease cup
support.
GSS2520JA
Instruction Manual
Guide d'utilisation
Step 16 (Tank clip assembly and gas tank installation)
a) Insert the tank clip (T) into the hole beside the tank seat on cart
base (A).
b) Put the gas tank on the tank seat and clip it using the tank clip.
c)
Connect the tank with regulator by screwing regulator collar onto
the tank valve. Conduct the leaking test on page 14.
12
Step 14 (Install the grease pan and
Heat Insulator)
a) Loose the three pre-installed bolts
on grease pan (V) and leave 1/4
of the bolt's length extending from
grease pan.
b) Insert the holes on the heat
insulator (U) into the pre-attached
bolts and push the heat insulator
back until in its on place.
c)
Tighten all the bolts using the
screwdriver provided.
d) Insert the assembled part above
into grill from back underneath grill
body.