Specific Safety Instructions; Using The Device - ULTIMATE SPEED UPK 10 E2 Consignes D'utilisation Et De Sécurité

water and seek medical
attention.
z Specific safety
instructions
„
We recommend charging the
power bank with compressor
once a month.
1
„
A slightly higher temperature
during charging is
absolutely normal and not
a malfunction. However, we
do recommend leaving the
power bank with compres-
sor to rest for 15 minutes
1
before using.
„
Protect the power bank
with compressor
moisture and high tempera-
tures, including fires.
„
Store the power bank with
compressor
and protect the device from
moisture and corrosion.
„
If you notice the power bank
with compressor
producing an unusual odour
or looking deformed in any
way, stop using the device
immediately and contact the
manufacturer.
„
Do not drop the power bank
with compressor
being used.
from
1
in a dry place
1
is leaking,
1
while it is
1
„
The power bank with
compressor
for use with car tyres. It is not
designed for use with large
tyres like tractor or truck tyres.
„
During inflation, high temper-
atures can be produced at
the air outlet. There is a risk
of burn injuries!
„
When using the jump
lead , ensure that the
18
black plug is securely
plugged into the vehicle
jumpstart outlet
„
When using the jumpstart,
make sure that all 3 indicator
lights are lit.
13
„
If the blue indicator light
goes out during the start
13
attempt, charge the power
bank with compressor
„
If the vehicle does not
start after the 3
attempt, stop the start process
and check the other causes
that may be preventing the
vehicle from starting.
z Using the device
Note: After switching on the power
bank with compressor
power bank switch
switches off automatically after
approximately 20 seconds if the
GB/IE/NI/CY/MT
is designed
1
.
8
.
1
– 5 Start
rd TH
with the
1
, the device
9
13