Technical Specifications - ULTIMATE SPEED UPK 10 E2 Consignes D'utilisation Et De Sécurité

z Technical specifications
The four individual cells used to
construct the rechargeable battery
are connected in series to produce
a total voltage of 4 × 3.2V ≈ 12V
and a capacity of 3500 mAh.
The battery output produced in this
way is the same as the output from
a rechargeable battery with a total
capacity of 14000 mAh at 3.2 V.
Model:
Battery type:
Battery capacity:
Charge cycles:
Charging time:
Peak current:
Starting current:
Operating
temperature:
Voltage:
Input voltage
(charging port):
Output voltage
(USB port):
Capacity:
Current consumption: max. 10 A
Maximum pressure
of the compressor
unit:
Maximum
achievable pressure: 3.5 bar
UPK 10 E2
Lithium iron
phosphate
14,000 mAh,
3.2 V ,
44.8 Wh
2000
up to 8 h
400 A
200 A
0 °C – 60 °C
12 V
5 V /2 A
5 V /1 A |
5 V /2 A
8400 mAh/5 V
10 bar
Continuous
operation:
Air flow rate:
Power supply:
Name or trade name of the
manufacturer, commercial register
number and address:
Manufacturer:
Dong Guan HP-Power Technology
Limited. Address: Room 103,
Building 1, No. 9 Hepan Road,
Tangxia Town, Donguan 523710,
Guangdong, China.
Importer:
C.M.C. GmbH
Address: Katharina-Loth-Straße 15,
66386 St. Ingbert, Germany
Saarbrücken local court,
HRB 15856
Model number:
HP12U-0502000-CEU
Input voltage:
100–240 V
Input alternating AC frequency:
50/60 Hz
Output voltage:
5.0 V
Output current:
2.0 A
Output power:
10.0 W
Average efficiency during operation:
79.493 %
Efficiency at low load:
76.241 %
Power consumption at zero load:
0.06 W
GB/IE/NI/CY/MT
max. 7 min*
22 l/min
9