Wiring - exodraft RS Serie Mode D'emploi

32 • UK

5.3 Wiring

Fan and motor speciications are provided on the fan's type plate. All the single-phased models are
adjustable.
Wires are to be connected as per the wiring diagram. For further details, please see guidelines for
the exodraft control units. All exodraft fans require extra safeguards in accordance with power
current regulations.
Any lightning conductor connected to the fan must respect current applicable legislation.
exodraft motor
Z2 U1
Z1 U2
Isolation switch:
In accordance with the provisions of the EU Machinery Directive* a chimney fan
must always have an isolation switch itted. The isolation switch must comply with national wiring
standards..
* Please refer to "Machine Directive 2006/42/EEC" – Appendix 1 item 1.6.3 "Separation of the sources of energy".
The isolation switch must be ordered separately, as it is not part of the standard exodraft chimney
fan delivery.
Anslutningskabel
och el-koppling
RS009-4-1
RS012-4-1
RS014-4-1
RS016-4-1
RS255-4-1
RS285-4-1
N
Nreg
T2
T1
L
brown = L
blue = Nreg
yellow/green =
brown = L
blue = Nreg
yellow/green =
3000112 RS DK DE NO SE UK NL FR 211014
Grundfos motor
AUX
MAIN
7 6
8 5 4
Steglöst Skydd
elektroniskt
reglerbar
The motor stands blocking
Yes (impedance protection)
Yes The motor requires overload
protection
3 1
2
L1
N
3 x 0,75
YEGN
POWER SUPPLY
1 x 230V ~ 50Hz