Montarbo FLYBAR WINDPRO 212 Notice D'emploi page 5

FLYBAR WINDPRO 212/215
Position the flybar above the speaker with the cams aligned with the rigging points. Insert
the four cams in the rigging points of the speaker and insert the four lock pins.
The maximum load that the flybar WIND PRO 212/215 can support is 160 kg/352 lbs*; it
can therefore be used to create a suspended cluster comprised of a maximum of three
WIND PRO 212 or WIND PRO 215 speakers. To make the connections between speakers,
use exclusively the Vertical Plates WP212/215 accessory (not supplied), which ensures
safe installation with an adjustable tilt angle.
*Maximum load in accordance with EUROCODE 3 (EN 1993-1-3)
8
To raise the structure, use the shackle and lifting bracket supplied with the flybar. Select the
holes for positioning of the lifting bracket according to the desired tilt angle; position the
bracket and secure it by inserting the two pins in the corresponding position. Use suitable
lifting equipment to raise the speakers.
WARNING! Check that pins are correctly inserted and locked.
Do not move pins when the system is hung.
B
B
User manual
9