Height Measurement Instructions - Health O Meter 402KL Notice D'utilisation

Balance à fléau pour médecins
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

HEIGHT MEASUREMENT INSTRUCTIONS

Note: Use caution when sliding height rod up and down. The rod should move
smoothly, do not move the rod in a jerking motion.
Note: Fold headpiece down when not in use.
Height Measurements (Refer to Figures 21-27)
A patient needs to be a minimum of 23-5/8" (600mm) in height for the height to be
Note:
accurately measured.
1. Raise the headpiece above the patient's head. (See Figures 21 and 23)
2. Position the patient against the height rod.
3. Ensure that the patient's posture is upright, and that the patient's head is straight and level.
4. Push the headpiece down until it rests on the patient's head. (See Figures 22 and 24)
5. Determine the patient's height by reading the value on the measuring strip nearest to the
line on the indicator. (see Figures 25 – 27 on page 22)
Figure 21
Figure 22
Figure 23
Figure 24
21

Publicité

Table des Matières
loading

Table des Matières