SVAT SE UC 1300 Manuel De L'utilisateur page 6

TROUBLESHOOTING
Please read this users manual carefully before using the Wireless Product.
If you still have difficulties to use the product, consult the following
syndrome, which will guide you to solve most common problems.
No picture after turning on the TV
1. Check the power supply.
•Ensure the both the transmitter and receiver are properly connected
and set.
•Ensure both the transmitter and receiver power indicators illuminate.
2. Ensure the video cable is well connected.
3. Ensure the TV channel is set to "Video".
4. Set the receiver to the channel with the clearest signal.
5. Shorten the transmission range/distance between the transmitter and
receiver. Reposition and/or adjust the video camera.
Unclear picture reception
1.Check to ensure the receiver channel is set properly for the desired
video camera.
2. Shorten the transmission range/distance between the transmitter and
receiver. Reposition and/or adjust the Bear Camera. Check 9V Battery
power is running out or not.
Unclear picture focus
1. The video camera is set at 4.9ft (1.5m) with a Free focus feature.
No Sound From TV
1. Ensure the audio cable is well connected.
2. Check volume level is set properly for desire.
www.svat.com