Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION Cont'd...
RECEIVER
1. Insert the 3.5 cable plug into the A/V Output Jack of the receiver.
2. Insert the (yellow & white) cable plugs into the Video Input and
Audio Input Jacks of your TV properly.
3. Connect the AC Power Adaptor Jack end to the 9V Power Input Jack
of the receiver.
4. Select/match the receiver channel to the desired video camera trans
mission channel.
5. Plug the AC Power Adaptor into a standard 120V/230V AC electrical
outlet.
6. Slide the ON/OFF Switch to the ON position.
7. Television Set configuration:
•Turn on the power to the television set.
•Switch the TV channel to the VIDEO/LINE INPUT position.
•Adjust the TV volume and pictures, as desired.
•TV/Video can be switched each other to monitor surroundings
while TV / DVD program is being played.
8. Unplug the AC Power Adaptor from the electrical outlet when it is not
in use or is left unattended.
VIDEO RECORDING SETUP
1. Follow the normal setup procedures for the Bear Video Camera and
Receiver.
2. Insert the (yellow & white) cable plugs into the Video Input and Audio
Input Jacks of your VCR properly.
3. Connect another video/audio cable from your VCR to the Video Input
and Audio Input Jacks of your television set.
Bear Video Camera
Receiver
3.5 Plug
Bear Video Camera
3.5 Plug
www.svat.com
Audio
Video
Input
Input
White Plug
Yellow Plug
AV Cable
A/V Source
Receiver
Audio
Input
White Plug
AV Cable
TV
TV
Video
Input
Yellow Plug
Publicité
