How To Use And Tips - MIA MP 1060N Mode D'emploi

How to use and tips


Make sure, that the temperature control button shows OFF and plug it surely into the
socket.If the temperature regulator isn't plugged-in correctly, an abnormal heating can
occur, which may cause accident or damage. Therefore make sure that the
temperature regulator is plugged-in correctly.

Connect the cable to a properly installed and grounded power socket only
(230V ~ 50Hz).

Adjust the temperature regulator to the desired temperature according to the food to
be cooked.

The appliance is pre-heated, when the control lamp of the temperature regulator
switches off. The control lamp can be illuminated periodically during operation to
show that the temperature will be kept.
Cooking with the multi pan
Pre-heat the multi pan approx. 2-5 minutes. If the control lamp switches off the pan has
reached the adjusted temperature.
Note: The cooking time is depending on the type of food to be cooked, the quantity and
the desired cooking result and has to be evaluated by own experiences.
Note: To avoid scratches at the non-adherent surface use kitchen tools of nylon, plastic
or wood only. Handle with care!
Caution! Heat and fire danger! The appliance gets very hot during operation. Keep
special care when using it. Only touch the handles or use oven mitts to open or
close! Never touch the hot housing or other hot parts!
After completion of the cooking process the food can be kept warm by switching back
to
MIN level.
MIN keep warm
1 minimum heat
2 roast good, hamburger
3 pancake, scrambled
4 ham, bacon
5 pizza
Please note that the lid has a steam outlet.
Attention: watch exhausting-steam when opening the lid !
 During operation glottal stops can occur. This isn't a failure.
The noise originates as a result of thermal expansion of the
heater and the heating plate.
 Don't touch the reflector with the hand, don't put flammable
materials onto the pan.
21