Making The Connections; Connecting The Studiolive Cs18Ai With A Single Rm Mixer - PRESONUS StudioLive CS18AI Guide De Démarrage Rapide

Making the connections

3
There are several different ways to utilize your new StudioLive CS18AI with the StudioLive RM
mixers and Studio One. The following details the most common setups using a single StudioLive
RM mixer, and using Studio One DAW software. For more setup options and use cases, please refer
to the User Manual, which is available as a downloadable PDF in your MyPreSonus account.
3.1

Connecting the StudioLive CS18AI with a single RM mixer

Connecting directly to your RM mixer
When connecting directly to your RM mixer (a single Ethernet cable with no switch between the CS18AI and
mixer) you'll need to use the Wi-Fi dongle included with the RM mixer to connect to a router for wireless control
from UC Surface and QMix.
Connecting to your RM mixer with an AVB switch
When connecting using an AVB switch you can connect a wireless router to the AVB switch for wireless control
from UC Surface and QMix. For the most current list of compatible AVB switches please refer to the StudioLive
CS18AI Knowledge Base on PreSonus.com.
NOTE: If you do not use an AVB compatible switch you will only have control between the CS18AI and RM mixer.
You will NOT have audio between the CS18AI and RM mixer since the audio transport requires an AVB network.
1. Connect your CS18AI to your RM mixer either directly or using an AVB
switch as shown above before powering on your system.
2. Power on the both the CS18AI and RM mixer.
AVB Switch
3. On the CS18AI press the UCNET button in the Master Control section to open the network
connection view touch screen.
StudioLive CS18AI Visual Quick Start Guide
AI Mixer AVB Card
7