TOOLWAY Tooltech 100084 Manuel De L'utilisateur page 2

CAUTION
Read and follow all instructions before operating fan. Do not use fan if any part is damaged or missing
WARNING
To reduce the risk of fire or electric shock, DO NOT use this fan with any solid-state speed control device. This appliance has
a three-prong grounded plug that must be inserted into a matching outlet. To reduce the risk of electric shock, the grounding
plug must not be cut off the plug. Where a two-prong wall outlet is encountered, it must be replaced: contact a qualified
electrician. Do not use the three-prong plug with a two-prong adapter. Do NOT attempt to defeat this safety feature. Use your
fan only with adequate wiring that is up to local regulation requirement. Connect to properly grounded outlets only.
RULES FOR SAFE OPERATION
• Do not insert fingers or any objects through the guard when fan is in operation.
• Disconnect fan when not in use.
• Disconnect fan when moving from one location to another.
• Disconnect fan when removing guards for cleaning.
• Make sure fan is on a stable, flat surface when in operation.
• Do not use fan in windows. Rain and moisture may create an electrical hazard.
• Do not operate fan without fan guards properly locked.
• Do not use with extension cord.
• Do not place fan or any parts near an open flame, cooking or other heating appliance.
• Do not operate fan with a damaged cord or plug, especially when this unit has been malfunctioned, dropped or damaged.
• Close supervision is necessary when this unit is used by or near children.
OPERATING INSTRUCTIONS
Connect power plug to standard 120-volt AC outlet. Caution: Make sure the Speed Control is in "O" (off) position.
SPEED CONTROL: Change the setting on the speed control to the desired setting - low "1", medium "2" or high "3" .
CLEANING
WARNING: Unplug from electrical supply source before cleaning. After servicing, any safety device (including grilles and
blades) must be reinstalled or remounted as previously installed. Use soft damp cloth then with dry cloth. Do not use harmful
cleaners. Do not bend the blades.
Technical Parameters:
240W 60 Hz 120V
DO NOT IMMERSE THE MOTOR IN WATER.
2