Edirol AUDIOCAPTURE UA-5 Démarrage page 32

Getting Connected and Installing Drivers (Windows)
Check whether there is sound
Now we will play back the sample data to check whether
connections are correct.
Playing back the sample data
Here we will use standard Windows functionality to play
back the sample data. The sample data is found on the UA-5
Driver CD-ROM.
1
Prepare the CD-ROM.
Insert the UA-5 Driver CD-ROM into the CD-ROM drive of
your computer.
2
From the Sample folder of the CD-ROM, drag
Alright(.wav) to your desktop, copying it.
fig.05-42e_30
3
Right-click the copied file
Alright(.wav), and select
Properties (Play for Windows
2000).
fig.05-43e_30
4
Play back the sample data.
Click the Preview tab, and then click
the button.
Was the sample data played back?
If it was played back correctly, this means that the
computer and the UA-5 are connected correctly, and that
the drivers have been installed correctly.
32
In order to hear the sample
data, you will need
approximately 30 MB of free
space on the hard disk in
which Windows is installed.
If it did not play back
correctly, refer to
"Troubleshooting" (p. 52) to
determine the reason. This
section contains information
on how to solve problems such
as no sound, or failure to play
back correctly.
Unauthorized use of the song
data included with this
product for any purpose other
than personal enjoyment is
forbidden by law. You may
not duplicate this data or use it
in a derivative work without
the permission of the
copyright holder.