Edirol AUDIOCAPTURE UA-5 Démarrage page 31

This completes audio input/output destination settings.
If you installed the special driver, proceed to Check whether
there is sound (p. 32)
If you installed the standard Windows driver, set the
Windows volume control. Proceed to step 5.
5
Open the volume control.
Click the Windows Start button, and select Programs -
Accessories - Entertainment - Volume Control.
6
Raise or lower the slider to adjust the volume of
the UA-5.
If you have installed the Standard driver, the UA-5 can use
the Windows volume control to adjust the output volume.
Items that can be set
Controls the volume of "music CDs" on the
CD Player
internal CD-ROM drive of the computer. (*1)
Controls the volume of sound output from
the "USB audio device" audio output device.
WAVE
Digital output and analog output will
change.
Controls the volume of the software synthe-
SW Synth
sizer built into Windows.
* 1 If the CD playback volume does not change when you adjust this
control, then change the WAVE volume.
Getting Connected and Installing Drivers (Windows)
If the Volume Control is not
installed on your computer,
use the Control Panel icon
Add or remove an
application to install it. For
details on installation, refer to
the Windows manual or Help.
You will be able to use the UA-
5 at the best audio quality if
you set the Volume Control
volume to the maximum
setting.
If Mute is checked or if the
slider is lowered all the way,
no sound will be output from
the UA-5.
If you are using Windows 2000
and CD Player is not
displayed, check the Digital
CD Playback item "Allow
digital music CDs to be used
with this CD playback
device". –> When playing
audio CDs from the
computer's internal CD-ROM
drive, or using the UA-5 to
play game music (p. 33)
31