Télécharger Imprimer la page

tomado TCM1301B Mode D'emploi page 14

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 25
1. Water reservoir cover
2. Water reservoir
3.
Riser tube
4. Water outlet
5. Cover filter holder
6. Filter holder
7. Coffee strength controller
8. Cover with mixing tube
9.
Glass jug
10. Hot plate
11. ON/OFF button
Before using the coffee machine for the first time, proceed as follows: Carefully unpack your coffee machine and remove all
packaging material and possible promotional stickers. Keep the packaging (plastic bags and cardboard) out of reach of children.
After unpacking the appliance, carefully check it for external damage that may have occurred during transport.
Place the coffee machine on a flat, stable and heat-resistant surface. It is best to clean the interior of the new coffee machine
prior to using it for the first time. Clean the appliance as described in section CLEANING AND MAINTENANCE. Then fill the water
reservoir with cold water up to the 1.25L mark and allow the appliance to make two or three runs without coffee. The appliance
will not function when switching it on with an empty water reservoir, the indicator led at the ON/OFF button will flash.
Check that the voltage stated on the information plate matches the voltage used in your region. Place the coffee machine on a
flat, stable and heat-resistant surface. Insert the plug in an earthed wall socket.
1. Raise the cover of the water reservoir and – using the glass jug – fill the reservoir with cold water to the required level (0.25L
to 1.25L = 2 to 10 cups). Do not fill the reservoir above the 1.25 mark. Place the cover back on the reservoir.
2. Remove the filter holder from the appliance. You do this by first removing the cover and then rotating the filter holder
counter-clockwise by the handle. Place a paper coffee filter (size 1 x 4) of which the edges have been folded back in the filter
holder. This prevents the filter bag from folding inwards and closing. Add the required coffee (extra-fine grind) and softly
shake it to flatten out the coffee. For 10 cups, according to taste, you can use 5 to 6 measuring spoons of coffee, or 6 grams
of coffee per cup.
3. Fasten the filter holder in the appliance again, making sure it is properly positioned, and then close it with the cover.
4. Place the glass jug on the hot plate.
PRODUCT DESCRIPTION
1
2
3
PRIOR TO FIRST USE
MAKING COFFEE
EN - 14
4
5
6
7
8
9
10
11

Publicité

loading