Cleaning And Care; Technical Data - JumpTek 084-6692-6 Guide D'assemblage, D'utilisation Et D'entretien

CLEANING AND CARE

Inspection
Check the trampoline and enclosure before each use for wear and damage. In case of damage, have it
•
repaired by your specialist retailer immediately.
The following conditions could pose potential hazards:
Missing, improperly positioned or insecurely attached frame pad.
•
Punctures, frays, tears, or holes worn in the mat or frame pad.
•
Deterioration in the stitching or fabric of the mat or frame pad.
•
Ruptured springs.
•
A bent or broken frame.
•
A sagging mat.
•
Unstable or improper assembling of the Supporting Poles and the trampoline vertical legs.
•
Unaffixed enclosure net.
•
Sharp protrusions on the frame or enclosure.
•
Unstable parts and connections.
•
Cleaning
Clean the frame pad with a soft cleanser to remove oil or dirt stains. Use cleansers suitable for padding
•
only.
Clean the enclosure net with a brush or a slightly damp cloth to remove dirt or dust.
•
Remove dirt and dust with a soft and slightly damp cloth.
•
When rust appears on the surface, remove it with either a wire brush or coarse sandpaper. Then treat the
•
spot with non-toxic paint.
For cleaning the frame pad, do not use aggressive cleansers or cleansers containing chemicals.
•
Storing
For extended periods of disuse, disassemble the enclosure net and trampoline and store them in a
•
clean and dry place.

TECHNICAL DATA

9' x 14' (287 x 426 cm)
250 lb
(113.6 kg)
16
142b
64.4 kg)