Angelcare AC327 Manuel De L'utilisateur page 38

2- SETTING UP THE SENSOR PAD
The Sensor Pad is designed to detect subtle baby movements on the surface of
the mattress. The alarm will only sound if NO movement is detected for 20 seconds.
4
38
1
2
3
Correct positioning
for slatted base
1. Remove the tab from the
battery holder.
2. Use a coin to remove/replace
the battery cover and insert the
battery face with + face up.
3. Replace the battery cover, align
2 dots and click to secure.
4. Remove the mattress from
the cot, place Sensor Pad
- Angelcare® logo side up -
on base in approximate centre
of mattress along the length.
It should be centred on the
hardboard if your cot requires
a hardboard support (see
'IMPORTANT' note below).
5. Replace the mattress.