Beko WMB 61421 M Manuel D'utilisation page 64

Auxiliary function selection
Use the following auxiliary functions according
to your daily needs. Select the desired auxiliary
functions before starting the programme.
Furthermore, you may also select or cancel
auxiliary functions that are suitable to the running
programme without pressing the Start / Pause
button when the machine is operating. For this,
the machine must be in a step before the auxiliary
function you are going to select or cancel.
If the auxiliary function cannot be selected or
canceled, light of the relevant auxiliary function will
blink 3 times to warn the user.
Some functions cannot be selected together.
C
For example, Prewash and Quick Wash.
If a second auxiliary function conflicting with
C
the first one is selected before starting the
machine, the function selected first will be
canceled and the second auxiliary function
selection will remain active. For example,
if you want to select Quick Wash after you
have selected the Prewash, Prewash will be
canceled and Quick Wash will remain active.
An auxiliary function that is not compatible
C
with the programme cannot be selected. (See
"Programme and consumption table")
Auxiliary Function buttons may vary according
C
to the model of the machine.
• Prewash
A Prewash is only worthwhile for heavily soiled
laundry. Not using the Prewash will save energy,
water, detergent and time.
Prewash without detergent is recommended
C
for tulle and curtains.
• Quick Wash
This function can be used in Cottons and
Synthetics programmes. It decreases the washing
times and also the number of rinsing steps for
lightly soiled laundry.
When you select this function, load your
C
machine with half of the maximum laundry
specified in the programme table.
• Rinse Plus
This function enables the machine to make
another rinsing in addition to the one already made
after the main wash. Thus, the risk for sensitive
skins (babies, allergic skins, etc.) to be effected by
the minimal detergent remnants on the laundry can
be reduced.
• Anti-Creasing
This function creases the clothes lesser when they
are being washed. Drum movement is reduced
and spinning speed is limited to prevent creasing.
In addition, washing is done with a higher water
level. Use this function for delicate laundry that
creases easily.
• Rinse Hold
If you are not going to unload your clothes
immediately after the programme completes, you
may use rinse hold function to keep your laundry
in the final rinsing water in order to prevent them
from getting wrinkled when there is no water in
the machine. Press Start / Pause button after this
process if you want to drain the water without
spinning your laundry. Programme will resume and
complete after draining the water.
If you want to spin the laundry held in water, adjust
the Spin Speed and press Start / Pause button.
The programme resumes. Water is drained,
laundry is spun and the programme is completed.
• Soaking
The Soaking auxiliary function ensures better
removal of stains ingrained into the clothes by
holding them in the detergent water prior to startup
of the programme.
• Pet hair removal
This function removes the pet hairs that remain on
your clothes more effectively.
When this function is selected, Prewash and Extra
Rinse steps are added to the normal programme.
Thus, pet hairs are removed more effectively by
performing the washing with more water (30%).
Never wash your pets in your washing
A
machine.
Delayed Start (In some models only)
With the Delayed Start function the startup of the
programme may be delayed up to 3, 6 or 9 hours.
Do not use liquid detergents when you set
C
Delayed Start! There is the risk of staining of
the clothes.
Open the loading door, place the laundry and put
detergent, etc. Select the washing programme,
temperature, spin speed and, if required, the
auxiliary functions. Set the desired time by pressing
the Delayed Start button. When the button is
pressed once, 3 hours delayed start is selected.
When the same button is pressed again, 6 hours
delay is selected, and when it is pressed for the
third time, 9 hours delayed start is selected. If
you press the Delayed Start button once again,
Delayed Start function will be canceled. Press Start
/ Pause button. Previous delayed start time light
turns off and next delayed start time light turns on
after every 3 hours. At the end of the countdown,
all delayed start lights will turn off and the selected
programme will start.
Additional laundry may be loaded during the
C
delayed start period.
Changing the Delayed Start period
Press Delayed Start button. Every time the button
is pressed, the period will change in 3-hour
increments and the light of the selected delayed
start time will turn on.
Canceling the Delayed Start function
If you want to cancel the delayed start countdown
and start the programme immediately:
Set the Delayed Start period to zero (all delayed
start period lights will turn off) or turn the
63
EN