patura A 8000 Instructions De Montage page 37

3.
Installation and Operation Headbail Unit
A
Installation Headbail Unit
Operation from the right:
For mounting the adaptor part, you have to use the hole with two dots
for the lower screw. Make sure that the screw threads show to the outside.
Attach the operating lever
of the adapter part.
B
Open head bail 3 just as wide as needed so that the animal comes straight through with its head.
Guide animal in the crush and lock back door.
When guiding the animal in, one person must hold the operating lever
! !
Operation from the left:
For mounting the adaptor part, you have to use the hole with one dot for the
lower screw. Make sure that the screw threads show to the outside.
Attach the operating lever
3 to the bracket
3
3 to the bracket of the adapter part.
3 of the headbail in open position.