Display And Control Panel - Lukas e3 Manuel D'utilisation

4.6.6 Pushing
de
Place the rescue rams between the object to be pushed and actuate the star grip
valve in the extending direction. (Figure H.).
en
4.7 Removing the tips
fr
The removeable tips are connected to the device arm with bolts. To remove the
es
tips, the bolts must be fully pushed in and then fully locked again (page 2; figure I;
numbers 5+6)
pt
4.8 Automatic switch-off
it
If the rescue device is not activated for a period of 60 minutes, it switches off auto-
matically.
nl
4.9 Dismantling/shutting down after operation
da
Once work has been completed, the device arms should be closed until the tips are
sv
only a few millimeters apart and the ram piston should be fully retracted and then
extended a few millimeters. This relieves hydraulic and mechanical strain on the
fi
device. For transport and storage, all devices should be secured and not loosely
stored.
el

5. DISPLAY AND CONTROL PANEL

pl
cs
5.1 Main switch (Figure M; No. 1)
For cutting and combination devices, the main switch includes the indicator for the
sk
cutting angle monitoring. (Figure F.). If the device twists to the right or left by an
angle critical for the blade stability during the cutting process, the blue ring changes
hu
color to red. Attention! Check whether you can complete the cutting process with-
out danger or whether you must reposition on the object to be cut.
ro
5.2 Battery indicator (Figure M; No. 2)
bg
The battery indicator indicates the current battery capacity.
sl
5.3 Load indicator (Figure M; No. 3)
hr
The load indicator scale indicates in what pressure range the tool is while working
and provides information about the remaining capacity.
et
5.4 Control light for the turbo function (Figure M; No. 4)
lv
The star grip can be moved by 20° in any direction; with a move starting at 15°,
lt
the turbo function is activated, the device moves faster. The turbo function is only
available in the low-pressure range.
zh
5.5 Control light for saltwater battery (Figure M; No. 5)
ko
The control light indicates when a saltwater battery is plugged into the device.
ja
ar
26