Do not carry out any changes (additions or conversions) to the
device without obtaining the prior approval of LUKAS.
All safety instructions on the device must always be complete and
in a legible condition.
Any mode of operation which compromises the safety and stability
of the device is forbidden!
Safety devices must never be disabled!
Before switching on/starting up the device and during operation,
make sure that nobody will be endangered by this.
Repairs may only be performed by a trained service technician.
Only genuine LUKAS accessories and spare parts may be used.
Please note that when working with the equipment, material could
fall down or suddenly break free as a result of shearing, tearing or
breaking.
Observe all intervals for recurring tests and inspections as de-
scribed in the chapter "Maintenance and care".
scribed in the chapter "Maintenance and care".
The eDRAULIC devices and batteries are suitable for underwater
The eDRAULIC devices and batteries are suitable for underwater
use to a depth of 3m and a duration of 60 minutes. The special
use to a depth of 3m and a duration of 60 minutes. The special
battery for salt water operation must be used in salt and sea water.
battery for salt water operation must be used in salt and sea water.
Swallowing or inhaling the hydraulic fluids can be detrimental to
health. Avoid direct skin contact. Please note that handling hydrau-
lic fluid can negatively affect biological systems.
Moving safety bolts, e.g. for removeable tips, must always be fully
inserted and locked.
When using chain sets, make sure that the chains are attached in a
straight line and that there are no knots in the chain.
When working near live components, high voltage flashovers and
the passage of current to the device are to be avoided.
Prevent the electrostatic charging of the device.
LUKAS eDRAULIC devices are not explosion-protected! Use in
explosion-protected areas is forbidden.
de
en
es
da
sv
as de-
sk
hu
bg
zh
ko
23
fr
pt
it
nl
fi
el
pl
cs
ro
sl
hr
et
lv
lt
ja
ar