Yamaha YZ Power Tuner Manuel Du Propriétaire page 19

Engine control settings (SETTING function)
Throttle position
G
Small opening angle
Medium opening angle : 30 degrees
Large opening angle
The fuel injection amount increases ap-
proximately 3% for each +1 change to the
adjustment value.
5. Push the set button.
The adjustment value will flash 2 times,
and then the value will be set.
6. Repeat steps 3–5 for each area that you
want to adjust.
To increase or decrease the adjustment val-
ues in all of the areas together
1. Select the [SLCT All] tab using the "
" button, and then push the set but-
ton.
The adjustment values in all of the areas
will be selected.
: 10 degrees
: 60 degrees
/
2. Change the adjustment values using the
" / " button.
All of the adjustment values will be in-
creased or decreased together.
3. Push the set button.
The adjustment values in all of the areas
will flash 2 times, and then the values will
be set.
12