Preparing To Work; Inserting The Filter - Collection Bag; Work; Starting Work - TMB MV PLUS Manuel D'utilisation Et D'entretien

1.
not be used.
2.
(Fig.11).
3.
bag (read the section "INSERTING A FILTER - COLLECTION
1.
condition (see SECURING THE MACHINE'").
2. To open the aspirator pull the lever (2) in the direction indicated
(Fig.12).
3. Using the handle (3), in the vacuum tank lid (Fig.13), remove the
1.
2.
1. Make all the checks listed in "
2.
supply socket (4) (Fig.10).
3.
4.
the vacuuming.
1.
carry out all the procedures listed in the chapter

MAINTENANCE".

2. Take the appliance to the designated machine storage place.
3.
condition (see "APPLIANCE SAFETY").
TYPE OF MAINTENANCE

Cleaning accessories

PREPARING TO WORK

PREPARING TO WORK
BAG").
4.
5. Insert the selected accessory into the vacuum hose.
6.
section
ATTENTION:
supplied with the machine (COLLECTION BAG-FILTER;
INLET AIR FILTERS; EXHAUST AIR FILTER).
INSERTING THE FILTER – COLLECTION BAG
4.
(4) inside the collection tank and making sure not to damage the
5.
6. Close the suction device by pressing the closing lever (1) (Fig.4)
7. Fasten the suction pipe back to the machine (Fig.11)
POWER SUPPLY CABLE CONNECTION

WORK

STARTING WORK

".
accessory.
(Fig.17).

AT THE END OF THE WORK

4.
the handle in the collection tank lid.
"DAILY ATTENTION: Park the appliance in an enclosed place, on a
could either damage it, or be damaged through contact with it.
MAINTENANCE

SCHEDULED MAINTENANCE OPERATIONS

X
23
"CONNECTING THE POWER CABLE").
(Fig.14).
X
X X X
X
X