Maintenance; Fuses; Troubleshooting Procedure - SLAT AESI C24 Notice D'utilisation

In order to ensure maximal and durable service, we strongly recommend that your product be maintained clean
and ensure that it is installed in a dry and ventilated location. We shall in no case be liable for damages associated
with improper use or incorrect maintenance of the equipment.
WARNING
Replacing the battery with a battery of incorrect type may result in an explosion hazard.
Used batteries must be disposed of in compliance with recycling requirements.
If the AESI does not deliver voltage

Check mains presence on the mains terminal strip

Check the fuses

Check the voltage value on terminals load1 and/or load2

The voltage on the battery cables must be identical to that of the load

Check that each 12 Vdc battery has a voltage greater than or equal to 11.5 Vdc

Repeat the measurement after having disconnected the load and the battery

Recheck the signalling of the indicator lights (see chapter 14)

If all the steps are validated, check the compatibility of your load
If the battery does not take over after a mains fault

Check the voltage on the battery terminals

Check the battery fuse

Check the voltage on terminals load1 and/or load2
If the indicator lights are not illuminated

Check mains presence on the mains terminal strip

Check the battery connection (and the battery fuse)

Check that the wire ribbon is properly connected

Check the voltage on terminals load1 and/or load2
For additional technical assistance, contact the SLAT hotline
For return requests, visit our website:
http://en.slat.fr/support-2/rma-customer-service/request-an-rma-number/
or contact SLAT After-Sales Service to obtain an RMA (Return Material Authorisation) number.
Returns are not accepted without an RMA number.
Primary fuse
User 1 fuse
User 2 fuse
Battery fuse FBat

18 Troubleshooting procedure

+ 33 (0) 4 78 66 63 70

16 Maintenance

17 Fuses

Ref. 2A
F1 5x20 T3,15A
F8 5x20 T3.15A
F7 5x20 T3.15A
4A, 30V
Automatically
resettable
20
3A
5x20 T3,15A
5x20 T3.15A
5x20 T3.15A
4A, 30V
Automatically
resettable