EINHELL GC-SC 18/28 Li Instructions D'origine page 21

The aerating roller scratches the surface of the
lawn, helping water to drain off more easily as
well as promoting oxygen intake. Aerate your lawn
throughout the growing period.
The equipment is intended for private use i.e. for
use in home and gardening environments.
Scarifi ers for private use are machines whose an-
nual operating time generally does not exceed 10
hours, during which the machine is primarily used
to maintain small-scale, residential lawns and
home/hobby gardens. Public facilities, sporting
halls, and agricultural/forestry applications are
excluded.
The operating instructions as supplied by the ma-
nufacturer must be kept and referred to in order
to ensure that the equipment is properly used
and maintained. The instructions contain valuable
information on operating, maintenance and servi-
cing conditions.
Warning! Due to the high risk of bodily injury to
the user, the equipment may not be used to grind
up branch or hedge clippings. Moreover, the
equipment may not be used as a power cultivator
to level out high areas such as mole hills.
For safety reasons, the scarifi er may not be used
as a drive unit for other equipment or toolkits of
any kind, unless specifi cally advised to do so by
the manufacturer.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
Anl_GC_SC_18_28_Li_Solo_SPK13.indb 21 Anl_GC_SC_18_28_Li_Solo_SPK13.indb 21
GB
4. Technical data
Idle speed .............................................2800/min
Protection class ................................................III
Voltage ................................................... 18 V DC
Working width ........................................... 28 cm
Number of blades ................... 12 double blades
Scarifying depth .......................... -2 / 2 / 4 / 6 mm
L sound pressure level .................... 66.4 dB(A)
pA
Uncertainty K .................................... 1.94 dB(A)
L sound power level ....................... 86.7 dB(A)
WA
L sound power level guaranteed ........ 90 dB(A)
WA
Uncertainty K .................................... 1.94 dB(A)
Vibration at the handlebars, max. ........... 2.5 m/s
Uncertainty K ..........................................1.5 m/s
Protection type .............................................IPX1
Weight ........................................................6.7 kg
Danger!
Sound and vibration
Sound and vibration values were measured in ac-
cordance with the standards EN ISO 3744,
EN ISO 11201 and EN ISO 20643.
Important!
The equipment is supplied without batteries and
without a charger is allowed to be used only with
the lithium-ion batteries of the Power X-Change
series!
The lithium-ion batteries of the Power X-Change
series are allowed to be charged only with the
Power-X charger.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
- 21 -
2
2
07.09.2021 16:13:13 07.09.2021 16:13:13