Setting The Sleep Timer; Resetting The Tv; Care And Cleaning; Helpful Hints-Problems/Solutions - Sanyo AVM-2760S Manuel D'instructions

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

SETTING THE SLEEP TIMER

The Sleep Timer will switch off the TV automatically.
1. Press the SLEEP key.
2. Use the 0 key to select the desired time
(from 30 minutes up to 3 hours).
Note: The Sleep Timer cancels when the TV is turned off
or if a power failure occurs.

RESETTING THE TV

Press the RESET key to automatically reset the television to factory settings. These features will automatically reset:
Picture/Sound Adjustments: Color, Tint, Contrast, Brightness,
Sharpness, Color Enhancer, and Tone
Channel Memory
Audio to Stereo
Caption to OFF
V-Guide to OFF
Language to English
Sleep Timer (if previously set)
If desired, personal settings can be made again using the menu options.

CARE AND CLEANING

The surface of the cabinet can be damaged if not properly maintained. Many common household aerosol sprays,
cleaning agents, solvents and polishes will cause permanent damage to the fine surface.
1. Unplug the power cord before cleaning the television.
2. Clean the screen and cabinet with a soft dry cloth.
Note: NEVER spray liquids on the screen because they can run down and drip onto the
chassis. This may cause component failure not covered under Warranty.
HELPFUL HINTS - PROBLEMS/SOLUTIONS
BEFORE REQUESTING SERVICE CHECK THE FOLLOWING CHART.
Problem:
TV turns off
automatically.
No picture, poor picture.
14
Check these Conditions:
Check signal (Cable/Ant.) connection.
Power surge protection feature.
Check antenna connections.
May be station trouble.
Brightness or Contrast misadjusted.
Possible interference from household
appliance.
VCR
TV
CABLE
VIDEO
POWER
RESET
MODE
1
2
3
4
5
6
7
8
9
CAPTION
SLEEP
0
Sleep
Use 0 key
Press RESET key
factory preset and
begin channel search
Try these Solutions:
Press POWER key.
Sleep Timer may have been set.
Unplug TV momentarily.
Adjust antenna.
Try a different channel.
Press RESET key.
(Continued on page 15.)
Sleep : Clear
Sleep : 3:00
Sleep : 2:30
Sleep : 2:00
Sleep : 1:30
Sleep : 1:00
:
0:30
again to return

Publicité

Table des Matières
loading

Table des Matières