Dismantling The Mixing Barrel; General Safety Information; Description - Rohde TS 20 Notice D'utilisation Originale

10.3. Dismantling the mixing barrel

10.3.1. General safety information

WARNING
Risk of personal injury and property damage!
It is recommended that at least 2 people disassemble the mixing barrel.

10.3.2. Description

Step Action
1 Turn off the machine.
2 Unplug the power plug.
3 Remove the 4 bolts on the left side of the machine
holding the mixing barrel halves together.
Tool:
6 mm Allen key
4 Remove the 4 bolts on the right side of the machine
holding the mixing barrel halves together.
Tool:
6 mm Allen key
5 Remove the 3 bolts from the bottom flange on the
right side of the machine.
Tool:
6 mm Allen key
Note:
Dismantling by at least 2 people is recommended.
44 / 191 - EN -
Illustration