Description; Extruder Die Attachment; Procedure For A Longer Period Of Idleness; General Safety Information - Rohde TS 20 Notice D'utilisation Originale

9.3.2. Description

9.4.

Extruder die attachment

9.5.

Procedure for a longer period of idleness

9.5.1.

General safety information

DANGER
Risk of personal injury and property damage!
For safety reasons, the power plug must be pulled out of the socket before any work is
carried out on the machine!
NOTE
Indicate that work is being carried out on the machine either with warning signs or barriers.
The machine must not be put into operation during this time.
At the material output (nozzle) of the pugmill there is a cutting
device (portioning device) for cutting the processed material to
length.
Pre-shaping moulds can be screwed onto the material outlet (nozzle). There
are 4 M5 threads in a 4x100 mm bolt circle.
Note:
The pre-shaping moulds are not included in the scope of delivery and are not
available from ROHDE GmbH.
42 / 191 - EN -