Introduction; Product Description; General Description; Technical Characteristics - Rohde TS 20 Notice D'utilisation Originale

1.

Introduction

Congratulations!
You have chosen a ROHDE pugmill, a branded product that meets the highest demands and places great value
on quality.
These original operating instructions are intended to make it easier for you to use your pugmill. For this reason, all
the important information and guidelines you need have been summarised to enable you to use your work tool
easily and safely. The basic requirement for safe working is compliance with all safety and handling instructions
given in this manual.
2.

Product description

2.1.

General description

The ROHDE TS 20 Pugmill stands for robust, durable construction and excellent performance.
The machine is very well suited for kneading ceramic bodies before further processing, mixing various bodies and
preparing clay. The pugmill produces excellent plastic mixes with a high degree of homogeneity for further
processing.
The mixing barrel, the mixing shaft with wing blades and all other machine components that come into contact with
clay are made of stainless steel.
The vertical design and the large feeder allow easy loading of the pugmill from above. The mixing barrel can be
easily dismantled for cleaning.
Two castors and two fixed machine feet guarantee mobility and a firm stand. The worktable and cutting device are
detachable; the aluminium nozzle is fitted with threads to fix extruder dies.
2.2.

Technical characteristics

Technical characteristics
Motor power
Power supply
Connector
Current
Extrusion diameter
Throughput
Weight
External dimensions (W x H x D)
Drive speed
Special features
TS 20 (230 V)
1.1 kW at approx. 1400 rpm
1 N PE 230 V AC 50 Hz
Schuko
7.6 A
From approx. 150 kg/h to 600 kg/h
540 mm x 1070 mm x 1100 mm
Approx. 15 rpm on the drive shaft
•
Design: Standing
•
Large stainless steel mixing barrel (diameter 235 mm)
• Aluminium die (diameter 80 mm) with plastic lining
•
Powerful motor for high mixing power
• Mixing barrel can be dismantled and detached for easy and safe
cleaning
•
Worktable fitted with a portioning device (cutting device)
• Safety device for automatic switch-off
31 / 191 - EN -
TS 20 (400 V)
3 N PE 400 V AC 50 Hz
CEE 16 A
10 A
80 mm
105 kg