Publicité
Les langues disponibles
Les langues disponibles
3.1- General safety warnings
• Understand the product. Read and follow the instructions in this manual.
• Do not disassemble or modify the product.
• Do not use this product if it is not completely assembled or if any parts appear to be missing
or damaged.
• Use and store in indoor dry environment.
• Maintain good housekeeping and sufficient lighting in the working area.
• Keep children and bystanders away while operating this product.
• Cleaning and user maintenance shall not be made by children.
• Use attachments/accessories specified by the manufacturer.
• Perform service maintenance by qualified personnel only.
• Do not use the tools in any operations that beyond the intended purpose.
3.2- Additional safety rules for electric power tool
• When the tool is not in use or before performing cleaning, turn it off and disconnect from
main power source.
• Never leave the product running unattended. Operate the tool only when hand-held.
• Do not overreach. Keep proper footing and balance at all times.
• Keep handles and grasping surfaces dry, clean and free from oil and grease.
• Dress properly. Keep hair, loose clothing, finger and any parts of body away from openings
or moving parts.
• To reduce the risk of electric shock, do not use near water or any liquid.
• Do not touch with wet hands.
• Do not expose the tool to rain or wet conditions. Water entering a power tool will increase
the risk of electric shock.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust.
• Maintain labels and rating plate through the life of service.
• Do not use the power tool if the switch does not turn on and off. Any power tool that cannot
be controlled with the switch is dangerous and must be repaired.
• Do not use a power tool while you are tired or under the influence of drugs, alcohol or
medication.
• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp edges or moving parts.
• Store idle power tool out of the reach of children and do not allow persons unfamiliar with
the power tool or these instructions to operate the power tool.
3.3- Special warnings when using this product
• Use personal protective equipment. Always wear earmuffs, safety goggles and dust mask
when using the tool. Wear safety gloves whenever necessary.
• Secure the workpiece to a stable platform using suitable clamps. Never hold the work pieces
with your hand or any part of your body during operations with the tools.
• Always connect the dust bag or dust collection facilities with the tool before planing
operation.
• Hold the power tool by insulated gripping surfaces only in case the cutter contacts its own
Disconnect product from its power source before maintenance, cleaning or any
intervention on product; or when you do not use product.
Disconnect product from its main power source, if product, power cable, or
extension cord is damaged or cut during operation.
Unplug product by pulling the plug. Do not pull the cable.
Page 11 / 24
Publicité
